Ribbed Sandwich Panel
Our standard production consists of 40 (+/- 2) density polyurethane injected locked panels of which the top surface is 10 mm thick plywood and bottom surface is galvanized sheet. Ribbed surface panels come in 7 different thicknesses, same as in the case of wall / ceiling panels. Ribbed panels have a load capacity of 2,000 kg/m2 and non-slip CrNi or 200-micron PVC coated steel sheet can optionally be used on top of the plywood.Wall and ceiling panels’ are enjected poliurethane 42 ( + 2 ) kg m3 betvveen polyester and trapeze coated two galvanized Steel sheets vvhich have 0,55mm thickness. The wall and ceiling panels’ surface is not anly polyester, but also according to your choice, it could be PVC, CRNİ, Plastisol and Galvaniz. Wall panels upper-side is produced like L shape.
There fore it is easy to connect wall and ceiling panels, and also it avoids thermal bridge.
|Temperature||Panel Thickness||Resistance of Heat Transmissivity||Heat Transmission Coefficient||Upper and Lower Metal Thicknesses||Panel Weight|
|+5°C + 10°C||60 mm||2,36||0,39||0,50 mm / 0,50 mm||11,65|
|+4°C -5°C||80 mm||3,16||0,30||0,50 mm / 0,50 mm||12,44|
|-6°C -12°C||100 mm||3,96||0,24||0,50 mm / 0,50 mm||13,32|
|-13°C -20°C||120 mm||4,76||0,20||0,50 mm / 0,50 mm||14,42|
|-21°C -30°C||150 mm||5,96||0,16||0,50 mm / 0,50 mm||15,23|
|-31°C -42°C||200 mm||7,96||0,12||0,50 mm / 0,50 mm||17,20|